The 3 Best Skate Waxes [2021 Skateboarding Curb Wax Reviews]

Once you’ve learned a couple of different grinds and slides, you’re going to start running into some sticky situations. Whether you’re just learning to 50-50 or boardslide or are looking to get better at bluntslides, you’ll need wax if you’re hoping to actually move while sliding or grinding a ledge or rail.

Curb wax, as its name implies, can be used to actually make curbs slide-able. Without wax providing some lubrication and greasing up the edges, there’s no way your trucks or deck will actually move after you lock into a grind or slide like on a skateboarding flat bar.. If you’re skating ledges or rails that aren’t in a skatepark, this is especially true. So keep some skate wax in your back pocket or backpack at all times, and check out these three curb waxes that we recommend.

Best Skate Wax – Top 3

[1] Dime Bag Hardware Triple Slick Skateboard Curb Wax

Check Price

Dime Bag Hardware makes more than hardware. Its Triple Slick skate wax is a winner on all accounts! It’s very portable, low cost, and comes in a multipack. But let’s take a closer look at some of its features:

  • Great addition to any skater’s must-have kit
  • Why make a multipack? If you lose or forget one piece of wax, you’ve got more!
  • Small enough to fit in your pocket and cheap enough to not worry about losing a piece
  • Blueberry, apple, cherry, and lemon scents provide a little extra goodness

This skate wax from Dime Bag Hardware is a great buy because it’s low cost and comes in a four-in-one pack. There’s really no getting around the fact that you’re going to lose some pieces of wax. After applying it to a ledge or rail, you’ll think you’ll remember to come back for it…and then you won’t. But with Dime Bag’s wax, it’s no biggie. Since it comes in a four pack, you’ll have extra. And since each piece is only two inches on all sides, it’ll fit in your pocket easily.

Smaller, individually wrapped pieces of wax for skateboarding really up the convenience factor. You often don’t need much more than a little wax for a rail or ledge, especially if you’re at a skatepark. So, having multiple small pieces will come in handy. If you have only one chunk of wax, it’s easy to lose or leave behind. So keep a four-pack of this Dime Bag skate wax on hand.

[2] Santa Cruz Skate Screaming Hand Curb Skate Wax

Check Price

There’s no shortage of fun when it comes to Santa Cruz’s skate gear. Its Screaming Hand skate wax is no exception. It’s hand-shaped wax that’s (probably) available only from Santa Cruz! What more could you want in curb wax? It includes:

  • Bubble gum scented
  • Fits in your back pocket
  • 4” x 4” x 2” dimensions
  • Large piece of wax can get any and all curbs skate ready

The Screaming Hand Curb Wax no doubt has some fun with otherwise typically square-shaped pieces of skate wax. A large piece of wax is perfect for prepping up curbs or other ledges for grinds and slides, since it will take a lot of wax in order to get an unused ledge or curb ready to slide.

The Screaming Hand also delivers a lot of wax for the money. So keep one on hand when you have a particularly sticky rail or ledge that you’re trying to skate. When you need a lot of wax, sometimes little wax crumbs and end pieces just won’t suffice. For such cases, break out the Screaming Hand.

[3] Spitfire Skateboard Curb Wax Embers Bighead MINI Red

Check Price

Spitfire has been a part of skateboarding for a long time, and while you might well know of the best skateboard wheels that it creates, there’s a lot more to its product lineup than just wheels.

Spitfire manufactures griptape, clothes, stickers, bearings, skate tools, and all sorts of other accessories. It also makes some solid wax that’s just what’s needed for when any ledge, rail, or other object keeps making your board stick. Here’s a closer look at the Bighead:

  • Mini curb wax that’s approximately 2” x 1.5”
  • Easily fits into your pocket
  • Super slick material for making surfaces slide
  • Iconic Spitfire design

Now, this might sound unexpected or trivial, but the red color of this wax comes in handy. Remember that wax is an easily lost, easily left-behind item. If you’re at the skatepark and you figure you’ll put a little was on a rail, it’s all too easy to just drop the wax thinking you’ll remember to come back for it. (You won’t.)

So having a piece of red wax—in the iconic Spitfire shape, no less!—will make it that much more visible. Red stands out against pavement.   

best skate wax

FAQ

How much wax should I apply to a ledge or rail?

It depends. If you’re skating a flatbar or ledge at your skatepark, you probably don’t need to apply very much wax in order to get the surface slippery enough to permit easier grinding and sliding. One or two passes along the edge of the surface might be all that’s needed. A thin layer of wax is enough to get most ledges and rails moving, especially if they’re at skateparks where they’re regularly used for slides and grinds.

It’s better to go with too little versus too much wax. If you’re at the skatepark and you put a full half bar of wax on a ledge, other skaters could be pretty annoyed when their boards shoot out from beneath them due to the too-slippery surface. (This is a big no-no at skateparks!)

If you’re skating a ledge or rail that’s never been skated before, expect to apply a lot of wax. Breaking in a new ledge and getting it slippery enough to grind or slide takes multiple passes with a piece of wax to get things moving.

Should I put wax on my skateboard?  

You might put a thin layer of wax on your board’s trucks or on the deck’s nose, tail, or middle portion depending on the trick that you’re trying. Usually, you’ll probably be best off just putting wax on the ledge or rail itself. But if it’s a particularly sticky object, then some extra wax on your board can help get things moving. As with applying wax anywhere else, take it slow and incrementally, apply only a little bit at a time.

Can wax damage ledges?

It’s true that wax, and grinding and sliding, can damage ledges. This is part of the reason why “No Skateboarding” signs are so prevalent and why properties install skate-stoppers. Over time, wax gets ground into ledges, causing a dark-colored stain on the edges. Some places are cool with letting skateboarders grind their ledges. Others aren’t. Fortunately, the urban world offers plenty of places to skate.

How can I avoid losing wax?

Wax is so easily misplaced. It’s left on ledges, next to rails, and even at the bottom of half-pipes and bowls. The truth is, you’ll lose some wax at some point, but it’s not a huge loss. If you want to avoid losing wax, keep a piece that’s small enough to store in your pocket. Just be warned that it might leave a bit of film or residue on your pocket lining after an hours-long sweaty skate session.

Better yet, take a large piece of skate wax and divide it into smaller pieces. Wax can be easily cut. This way, if you lose a piece, it’s no big loss. Again, most ledges and rails don’t need too much wax in order to get you sliding and grinding along, so small pieces will do the job well. 

Longboarding Guide
Logo